titanium wire mesh 

Grade:  TA1≥99.95% TA1 TA2 TC4 TA9 TA10 Titanium alloy, etc

Density: 4.5g/cm3

melting point of titanium: 1660.6 ℃ 

Mesh:0.5-700mesh(Mesh count refers to the number of mesh holes per inch)

Weaving way: Plain weave/ twilled weave/dutch weave/twilled dutch

Titanium mesh has low density and high strength

The density of titanium metal is 4.5g/cm3, which is higher than aluminum but lower than steel, copper, and nickel, but its strength ranks first among metals.

High purity titanium wire mesh generates a dense, adhesive, and inert oxide film on its surface in a highly corrosive medium environment, resulting in passivation and protecting the titanium wire mesh matrix from corrosion, thus achieving strong corrosion resistance; It can play a good role in corrosion resistance in seawater, wet chlorine, chlorous acid and hypochlorite solutions, nitric acid, chromic acid metal chlorides, organic salts and other environments.

Titanium wire is available in black and white,The surface of white titanium wire is bright and uncoated, while the surface of black titanium wire is coated with graphite. The titanium mesh woven with white titanium wire is suitable for making electrode mesh, battery mesh, and supporting collector mesh. The titanium mesh woven with black titanium wire has a relatively high cost-effectiveness and is mainly used for filtration of chemical equipment, screening of corrosive environments, and marine vessels.